Skip to content

Billboard letter height: which rule of thumb holds at 50 metres

Published · 5 min read

Look up how big the type on a poster needs to be and you will find a rule of thumb within a minute. Read three guides and you will find three. Work them through for a German 18/1 billboard seen from 50 metres, and the smallest and largest answers sit a factor of ten apart.

None of these rules is wrong. They just come from different situations: shop windows, banners on site hoardings, illuminated signs. Here is what each rule actually measures and how to turn it into a number for your own creative.

1. Three rules, one distance

The banner guide from the German printer printbro works like this: for every three metres of reading distance, text needs about one centimetre of letter height. The sign maker Rüffert puts the legible distance at 350 to 500 times the letter height. The vinyl-lettering supplier folien-arbeiter recommends 1 to 2 cm of letter height per metre of reading distance for short words.

For a billboard seen from 50 metres, our own arithmetic gives: about 17 cm following printbro, 10 to just over 14 cm following Rüffert, and 50 to 100 cm following folien-arbeiter. According to crossvertise, the German 18/1 billboard is 252 cm high. A line with one metre of cap height would fill almost half of it.

30-second test: Write down where the rule of thumb you use comes from. If it was made for shop-window lettering, it does not automatically fit the roadside.

2. Legible and readable are two different distances

The digital signage company Visix separates two values in its table: the distance from which type can be read at all, and the shorter one from which a person in motion actually reads it. For 4-inch letters the table gives 100 ft as the maximum viewing distance and 40 ft for maximum impact. That is a factor of two and a half.

printbro says much the same from the other side: for pure long-range effect, an eye-catcher rather than running text, smaller heights will do. So a logo only has to be recognised from 50 metres. A price or a web address has to be read.

30-second test: Mark every piece of text on the creative with R (must be read) or S (only has to be seen). Check type size only on the R elements, and on the smallest of them.

3. Use the real distance

According to crossvertise, most passers-by see a poster from around 50 metres. That is a good starting value for a billboard on a main road. At a bus shelter people stand closer; on an arterial road they drive past further away.

Rule of thumb from our own projects: work with the distance from which most people first see the site. Someone who only reads at ten metres while walking past has lost sight of the creative before they have understood the line.

30-second test: Open the location in a map view and measure the distance from the middle of the road or the pavement to the panel. Put that number, not the 50 metres from a guide, into your rule of thumb.

4. Typeface and case move the limit

Rüffert writes that the multiplier is lower for thin, decorative and serif typefaces than for bold, plain type. The same page puts the legible distance of lower-case letters at about 50% below that of capitals. Its 500-times example is explicitly for bold block capitals.

A rule of thumb that does not name the typeface is therefore only worth half as much. A claim set in a fine serif in mixed case lands at the bottom end of every range.

30-second test: Check whether your rule refers to the height of a capital or of a lower-case letter. Then measure exactly that height in the layout, not the point size.

5. Light and colour count too

The United States Sign Council, an industry body, has published a table of index values for its rule, by illumination, typeface and colour. The higher the value, the smaller the type can be. For an externally lit Clarendon it gives 28 for black on white, but only 24 for white on black. Yellow on green, internally lit, reaches 37.

For your creative this means the same line needs a noticeably different height depending on colours and light. Reversed type on a dark background looks elegant in the layout and costs legibility outside.

30-second test: Switch the creative to greyscale. If the type no longer stands out clearly from the background, it needs more size or more contrast.

6. Fewer words is the cheapest way to go bigger

According to crossvertise, a poster is looked at for 2 seconds on average, and the guide recommends 5 to 7 words. folien-arbeiter plans 2 to 3 cm per metre for longer texts, more than for short words. More words need bigger type, but have less room on the same panel.

Every word you cut makes the remaining ones bigger without the panel growing.

30-second test: Delete the subline as a trial. If the headline can then go up a size and the message still lands, the subline stays out.

Why your own eyes beat any rule

Rules of thumb give you a starting value. Whether the line works on this particular panel, with this typeface, these colours and these surroundings, only shows once the creative is on the panel itself.

With a mock-up, every type size means a new file. In a live simulation you place the creative on a photo of the real site, shrink the view to phone size and see straight away whether the R elements are still readable. For a quick look at a single creative there is our readability check, and the sizes of the common formats are in the format database.

Sources

Related

Newsletter

Once a month: what is happening in out-of-home

Each issue brings a new practical article, the industry news we noticed, and a small test you can run yourself in 30 seconds. No sales mails, no tracking. Every issue has a link to unsubscribe.

Would you like to see this on your own sites?

We are happy to show you the platform with your own sites and tell you plainly what makes sense in your case.